Unable to forward to Mail Enable Server |
Post Reply 
|
| Author | |
ykaraman 
Newbie 
Joined: 15 March 2007 Location: United States Status: Offline Points: 5 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Unable to forward to Mail Enable ServerPosted: 15 March 2007 at 4:14pm |
|
I installed Spam Filter ISP trial version on my server. I set it up for single server and single IP operation. SF is using port 25 while my MailEnable is using port 26. I am running into issues when mail clears SF and while it is forwarded to ME. I am getting the following message: Socket Error # 10061 -- Connection refused. - Forwarding to:50.123.132.15- message queued – mail@isp.net My ME server displays the following message in its SMTP inbound test diagnosis results: 220 my_mailserver.mydomain.com Welcome to SpamFilterISP SMTP Server v3.1.3.599 - Unlicensed Evaluation Copy When I setup SF I specified my fully qualified domain name for the e-mail server. Please note the domain name in the above message (“my_mailserver.mydomain.com”). |
|
|
YK
|
|
 |
|
|
LogSat
Admin Group 
Joined: 25 January 2005 Location: United States Status: Offline Points: 4104 |
Post Options
Thanks(0)
Quote Reply
Posted: 15 March 2007 at 4:39pm |
|
ykaraman,
The error: Socket Error # 10061 --
Connection refused. - Forwarding to:123.123.123.123 - message queued –
mail@isp.net indicates that your mail server (MailEnable) is rejecting
the connection from SpamFilter, when SpamFilter attempts to forward it emails.
As MailEnable is simply rejecting the connection, you'll need to look at
MailEnable's logs to see why it's not accepting them.
The 2nd issue with the banner is rather unusual. The
welcome banner:
220
my_mailserver.mydomain.com Welcome to SpamFilterISP SMTP Server v3.1.3.599 -
Unlicensed Evaluation Copy
is sent by SpamFilter when anyone connects to port 25. The
"my_mailserver.mydomain.com" is
customized by entering a valid value in the "Settings - Configuration" tab,
under the "FQDN" box. Please ensure you click on the "Save SMTP Settings" button
to activate that setting.
The "" part can be customized under the "Customized Items"
tab, in the "Welcome Banner welcome text".
|
|
|
|
|
ykaraman
Newbie
Joined: 15 March 2007 Location: United States Status: Offline Points: 5 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 March 2007 at 9:18am |
|
After installing the new version there have been some improvements but I still can't forward mail to MailEnable. I still get the following message: Warning - This IP Address appears to be running an SMTP Server other than MailEnable or the welcome message has been changed. SFISP's header appears to be: 220 mydomain.com Welcome to SpamFilterISP SMTP Server v3.1.3.599 - Unlicensed Evaluation Copy where mydomain.com represent's our domain name in the actual output. I don't think I will get a response from ME on this. Any help from your side will help me move ahead with your product. Regards, Yavuz |
|
|
YK
|
|
|
|
|
ykaraman
Newbie
Joined: 15 March 2007 Location: United States Status: Offline Points: 5 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 March 2007 at 12:13pm |
|
I found a solution to the SFISP -- MailEnable issue. I set this up on a single server with one domain. I was using the same IP for SFISP and ME but using different SMTP ports for each (26 for ME). I have two public IP addresses on the server. When I dedicated an IP address to SFISP and ME and used SMTP port 25 for both (SFISP and forwarding address for ME) it worked fine. I am guessing most installations with multiple server, domains, or IPs wouldn't have experienced this. Regards, Yavuz |
|
|
YK
|
|
|
|
Topic Options|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
This page was generated in 0.172 seconds.