Print Page | Close Window

Errors found in logfile

Printed From: LogSat Software
Category: Spam Filter ISP
Forum Name: Spam Filter ISP Support
Forum Description: General support for Spam Filter ISP
URL: https://www.logsat.com/spamfilter/forums/forum_posts.asp?TID=2473
Printed Date: 03 June 2025 at 6:53am


Topic: Errors found in logfile
Posted By: Guests
Subject: Errors found in logfile
Date Posted: 24 November 2003 at 5:17pm

I found the following errors in my logfile this morning... running BETA .263

<SNIP>
11/23/03 21:21:07:773 -- Exception occurred during ResyncSaveCorpus: Out of memory
</SNIP>
<SNIP>
11/24/03 09:06:52:355 -- Exception occurred during TimerMinuteTimer: Unable to write to C:\PROGRA~1\SPAMFI~1\SpamFilter.ini
</SNIP>
<SNIP>
11/24/03 09:07:47:664 -- Exception occurred during TimerMinuteTimer: Unable to write to C:\PROGRA~1\SPAMFI~1\SpamFilter.ini
</SNIP>
<SNIP>
11/24/03 09:08:47:861 -- Exception occurred during TimerMinuteTimer: Unable to write to C:\PROGRA~1\SPAMFI~1\SpamFilter.ini
</SNIP>
<SNIP>
11/24/03 09:09:40:216 -- Exception occurred during TimerMinuteTimer: Unable to write to C:\PROGRA~1\SPAMFI~1\SpamFilter.ini
</SNIP>
<SNIP>
11/24/03 09:10:01:907 -- Begin Sync Corpus.db
11/24/03 09:10:01:937 -- Exception occurred during ResyncSaveCorpus: Out of memory
</SNIP>
<SNIP>
11/24/03 09:14:25:096 -- Exception occurred during MyFind: Access violation at address 00402E11 in module 'SPAMFI~2.EXE'. Read of address 1D3AA642 ###aristocracy!,###119625###119626
11/24/03 09:14:25:206 -- Exception occurred during MyFind: Access violation at address 00402E11 in module 'SPAMFI~2.EXE'. Read of address 0BBBC4E7 ###fluent!,###120551###120565
</SNIP>

I tried to stop the service, but it wouldn't stop properly - waited about 5 minutes - then restarted the server.  Checked the logs, and the corpus.db hadn't saved for over 12 hours.   I'm assuming that I lost all the corpus data for that time period.

I don't know if you want these type of reports sent here or not... let me know if there's a better way for you...

-Ric


Replies:
Posted By: LogSat
Date Posted: 28 November 2003 at 2:14pm

Ric,

Thanks for the report. The first "Out of memory" problem is most likely the cause of all the the subsequent errors. That out of memory is a know problem that has been a big cause of pains, as there is no way currently to reproduce it. If you could let us know how much RAM the beta usually takes, and what happens to the RAM when that error occurs, that may help us in pinpointing the problem.

Thanks,

Roberto F.
LogSat Software


Print Page | Close Window